Agile Interceptor Pro 27 Tribal Green EB
You Asked For It, You Got It - Neck-Thu Body, EMGs,
Mahogany Body, 27" Scale...
| Taking Deposits Only.
Projected Shipping Date is August 1st.
Total price is $649.99 plus shipping. Balance will be charged prior to
shipping.
Designed based on specs requested by our
customers
Real Quilted Maple top and
double cutaway light mahoganny arch top body
Mahogany Body
27" scale 5 piece maple
neck-thu body construction
USA Made EMG 707 Pickups
Ebony fretboard with no
markers. Position markers are located on the side of the neck.
24 Extra Jumbo 2.9mm frets and a 13.7" (350mm)
radius neck for fast play
Grover Die Cast tuners
Floating Trem Licensed by Floyd Rose
Grover Die Cast tuners
Volume & tone controls and a coil tap
Reverse Headstock
Width of the neck at the nut: 1 7/8"; at the
22st fret: 2 3/16"
Uniform Neck Profile - For
ultra fast playing - 21.5mm at the frest fret and 22mm at the 12th
fret.
Overall length, including the strap button: 41";
Actual Weight is only 8.5 lbs
|
|
Agile Dauntless SBD CSBF - under $300
The New, Low Cost, High Value Spectacular!
| Real Flame Maple top
and single cutaway solid Mahogany arch top body
Seymour DuncanHB-102N and
HB-101B pickups with Alnico 5 magnets
Graph Tech Nut
Full body and neck binding
Set-in Maple neck with
Rosewood fretboard and trapezodial inlays
22 Jumbo 2.7mm frets and a
13.7" (350mm) radius neck for fast
play
Grover Die Cast tuners
Two volume & two tone controls and a
3-way pickup selector switch help you find your sound
Stop-Bar tailpiece transfers string vibration to
the body of the guitar and produces superior sustain
Made in Korea
Width of the neck at the nut: 1 5/8"; at the
22st fret: 2 3/16"
Neck Taper is 21.5 mm at the 1st fret and 23.5
mm at the 12th fret
Thickness of neck at the first fret approx
11/16"
Overall length, including the strap button: 40";
Scale length: 24.7"
Bridge pole spacing is 3", and the Tail piece
pole spacing is 3 1/4"
Width at the widest point: 13"
Body thickness 2" at edge
Actual Weight is only 10 lbs
|
|
Douglas Fulcrum Pink
- under $150
Classically shaped V-Guitar from Douglas!
| High output ceramic pickups
Bound Rosewood fretboard with 24 jumbo
frets (2.77mm) and dot inlays
Neck taper/thickness at the 1st fret: 21.5 mm;
at the 12th fret: 23.5mm
Die cast chrome tuners with 12-1 turning ratio
Lightweight Basswood body, weighs only 7 lbs and
creates for great tone
2-Piece Maple bolt on neck with adjustable truss
rod
Two volume and one tone control
plus a 3-way pickup selector switch
Width of the neck at the nut: 1 5/8"; at the
22st fret: 2 3/16"
Overall length 45.5"; Scale length: 25.5"
Width at the widest point: 17", body thickness
at the edge: 1.5"
Actual Weight is only 7 lbs
|
|
Douglas WVEB Violin Bass SO - under $150
Light Weight Semi Hollow Short Scale!
| The bass features a Real
Tiger Maple Flamed Top and Back
As a traditional violin style bass, it really
stands out!
The bass also features a maple trus-rod
adjustable set neck with rosewood fingerboard and high quality
electronics.
2 volume controls and a 1 tone control.
Get that classic Voilin Bass Sound for 1/4 the
price.
This semi-hollow bass has tons of sustain and is
fairly loud even without an amp.
It has a very thin easy playing neck and just a
knockout to look at.
The bass has chrome hardware.
The bass guitar measure 43 1/4” overall not
including the strap button.
The neck is 1 19/32” wide at the nut and 2 1/16
at the 22nd fret.
Scale length is 30.3”.
String spacing at the bridge is 1 3/4".
Body thickness is 2".
Pickup dimensions are 1 1/4" x 2 3/4"
Overall length 43" Width at widest point 12 1/2"
Body length 17 3/4" Upper Bout 9 3/4"
|
|
Douglas WPB-980 Fretless - under $300
Fretless Bass at an Incredible Price!
| Lightweight!
Weighs approx. 9.5 lbs
Neck-Thru-Body construction
for superior sound
Ash Body with Walnut lines
for a great look
Dual cutaway body is contoured
and shaped for outstanding comfort
Deep cutaways allow easy access to the
entire fingerboard on this 34" scale bass
Hard Rock Maple Neck with
adjustable truss rod
Rosewood fretboard with
position markers on side of fingerboard
Two Active Humbucker Pickups
for great sound; easy change battery compartment
Three band EQ plus
volume and balance controls for lots of sound variation
STH-5 Custom Bridge, Die Cast tuners, and black
hardware
Width of the neck at the nut approx: 1 5/8";
Overall length approx: 45"
Width at the widest point approx: 12 1/2", body
thickness at the edge approx: 1 3/4"
|
|
Valencia CG-190CE Acoustic Electric - under $150
Great amplified sound at an unbelievable price!
| This classical sized (39") acoutic
gutiar is for easy handling
It has a full rich sound and the cutaway body
allows access to the highest frets
The amplified sound is true and the three band
EQ, volume and presence control allow you to shape your sound
Quality Spruce top and Mahogany back and sides
Rosewood fretboard and bridge
NuBone nut and saddle from GraphTech
Nylon Strings
Shadow Pre-amp From Germany
The inlaid soundhole adds the finishing touch to
this great guitar
Body Thickness is 4" at the bottom - tapers to 3
5/8" where the neck joins the body
Scale length: 25.5". Width of the neck at the nut
is 2"
|
|
This guitar has a beautiful Ash
top and rounded back
The stunning Burst finish lets the beauty of the
wood show through
The bound body is a slim cutaway and features a
traditional sound hole ordained with a rosette inlay
The result is a smooth, clear sound; and it
sounds great alone or when used with an amplifier
The 4 band EQ provides tonal
control via bass, mid, treble and presence sliders, in addition to a
separate volume control
Tuners are made of die cast chrome which are
fitted onto a Mahogany neck with Rosewood fingerboard with diamond
inlays
Width of the neck at the nut: 1 11/16"; at the
22st fret: 2 2/16"
Overall length 41 1/2"
Width at the widest point: 15 9/16", body depth:
3 1/4"
Actual Weight is only 5.5 lbs
Agile HRB-200 ASB - under $170
|
|
